Release 5.2.0.2

Document Number: 14RN81-00M
Revision AM

January 2025

Restrictions: This document contains proprietary information that is protected by copyright; it is intended for use by PCTEL and its customers only. It is not to be disclosed to a third party. All rights reserved. No part of this document may be photocopied or reproduced in any way without the prior written permission of PCTEL, Inc. The information contained in this document is subject to change without notice. PCTEL makes no warranty of any kind relating to this document.

COMMENT ON KNOWN DEFECTS AND OTHER ERRATA

This document lists problems known to be associated with the current release. PCTEL® is committed to releasing defect free products and appreciates any reports of issues or assistance in the identification of issues. Problems are prioritized and queued for remedy.

PCTEL® is always interested in your feedback concerning our products, and the features or additions that would make them better. Please feel free to contact PCTEL using the support information below with any suggestions for improvements.

Trademarks

© 2025 PCTEL®, Inc. All rights reserved. PCTEL, SeeHawk® Collect, SeeHawk Collect logo, SeeHawk® Touch, SeeHawk Touch logo, SeeHawk® Central, SeeHawk® Monitor, SeeWave®, SeeWave logo, Gflex^®, IBflex^®, HBflex™, MXflex^®, EXflex^®, and the PCTEL logo are trademarks of PCTEL, Inc.

Android^™ is a trademark of Google Inc.

Bluetooth® is a registered trademark of Bluetooth SIG.

Samsung® and Galaxy Tab® S are registered trademarks of Samsung Electronics, Co. Ltd.

Windows® is a registered trademark of Microsoft Corporation.

Notices and Warranty Information

The information in this document is subject to change without notice. PCTEL assumes no responsibility or makes no warranties for any errors that may appear in this document and disclaims any implied warranty of merchantability or fitness for a particular purpose. Further, PCTEL shall not be liable for incidental, consequential or other damages in connection with the use of this document.

Copyright Information

No part of this document may be used or reproduced in any form or any means, in whole or in part, without prior written consent of PCTEL.

Enterprise Distributed Technologies

Reserved.

Flexera Software LLC

Open Street Map Android Library, Color Picker Library and OpenBeans Library

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE‐2.0.

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

See the License for the specific language governing permissions and limitations under the License.

PCTEL

22600 Gateway Center Drive, Suite 100

Clarksburg, MD 20871 USA

Table of Contents

1.0 Current Release Notes........................................................................................ 5

2.0 Previous Release Notes...................................................................................... 9

2.1 Release 5.1.0.0 (September 2024)............................................................... 9

2.2 Release 5.0.0.0 (March 2024)...................................................................... 13

2.3 Release 4.2.0.5 (May 2023)......................................................................... 17

2.4 Release 4.1.0.1 (September 2022)............................................................. 20

2.5 Release 4.0.0.1 (May 2022)......................................................................... 23

2.6 Release 3.4.1.0 (November 2021).............................................................. 26

2.7 Release 3.4.0.2 (October 2021)................................................................... 28

2.8 Release 3.3.0.0 (August 2021).................................................................... 30

2.9 Release 3.2.0.2 (March 2021)...................................................................... 32

2.10 Release 3.2.0.0 (February 2021)................................................................. 34

2.11 Release 3.1.0.0 (December 2020).............................................................. 36

2.12 Release 3.0.0.2 (May 2020)......................................................................... 40

1.0 Current Release Notes

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	5.2.0.2
SeeGull Connect	SeeGullConnect.apk	3.5.0.0

FEATURES

Supports IBflex and HBflex Mixed Analog/P25 DL and UL Decode scans. Scanner option and firmware 3.13.0.0 or later are required.
Supports IBflex and HBflex NR Top N Signal scan on 10 MHz to 6 GHz super band using SSref. Scanner option and firmware 3.13.0.0 or later are required.
Supports IBflex and HBflex P25 UL Traffic Decode scan with Phase 2 scrambled signals. Scanner firmware 3.13.0.0 or later is required.
Supports IBflex and HBflex P25 UL Traffic Decode frequency offset. Scanner firmware 3.13.0.0 or later is required.
Supports IBflex and HBflex FD-LTE Enhanced Top N Signal Scan Compensated NTN LTE signal mode and frequency offset value. Scanner option and firmware 3.13.0.0 or later are required.
Supports Gflex LTE Enhanced Top N Signal scan and Blind Scan Ultra High Speed and 5G/4G Spectrum Sharing UHS modes. Scanner firmware 6.0.0.0 or later is required.
Supports Gflex LTE Blind Scan One-time MIB/SIBs L3 reporting mode. Scanner firmware 6.0.0.0 or later is required.
Supports Gflex NB-IoT Blind Scan One-time MIB/SIBs L3 reporting mode. Scanner firmware 6.0.0.0 or later is required.
Supports Gflex LTE & NB-IoT Blind Scan One-time MIB/SIBs L3 reporting mode. Scanner firmware 6.0.0.0 or later is required.
Supports Gflex NR Blind Scan One-time MIB/SIBs L3 reporting mode. Scanner firmware 6.0.0.0 or later is required.
Supports FBER averaging for P25 Decode, P25 DL Active Scan List, DMR Decode, DMR DL Active Scan List, TETRA Decode and TETRA DL Active Scan List.
Supports BER averaging for OOS-BER and OOS-BER Active Scan List.
Indoor Grid Features:
- Supports Mixed Analog/P25 DL Decode Scan.
- Supports NR Top N Signal Scan.
- Supports TD-LTE Enhanced Top N Signal Scan.
- Supports importing Analog FM and Mixed Analog/P25 uplink data from SeeHawk Monitor.
- Supports grouping for LTE Enhanced Top N Signal scan channels. An LTE group can contain channels from both FD-LTE and TD-LTE, and from different bands, Grading is based on the channel with the strongest DL Signal Power (RSRP).
- Supports grouping for NR Top N Signal scan channels. A NR group can contain channels from different bands. Grading is based on the channel with the strongest DL Signal Power (SSS-RP).
- Supports TX Cable Loss input for the Signal to Building Commissioning Test to allow user to override the power adjustment value.
- Supports capability to exclude test points from grading in the Exterior Leakage Commissioning Test.
- Restricts deletion or renaming BDA information that comes as part of the test plan from SeeHawk Central.
- Supports linking BDA information to Commissioning Tests. Restricts changing the links between BDA information and Commissioning Tests that come as part of the test plan from SeeHawk Central.
- Updated BDA information content.
SeeHawk Central Features:
- Limit test upload to SeeHawk Central to the building defined in SeeHawk Central or last uploaded building from Touch.
- Supports IBWC file as part of test plan from SeeHawk Central.
- Supports mapping BDA information created in Touch to existing BDA information in SeeHawk Central or create new BDA information in SeeHawk Central.
Supports importing Analog FM and Mixed Analog/P25 uplink data from SeeHawk Monitor into Outdoor and Indoor Test.
Supports Analog FM in Signal Analyzer Channel Mode with decode.
Supports NR FR1 and FR2 in Signal Analyzer Channel Mode with decode.
Supports NR 5G FDD n31 DL/UL, TDD n54, FDD n72 DL/ UL, FDD n100 DL/UL, and FDD n109 DL/UL bands.

Restrictions for Uplink Testing:

Supports only one channel at a time for Uplink testing.
“Shared” channels are supported in P25 Phase 1.
Test radio ID can be decoded in P25 Phase 1.
Test radio dedicated channel is supported in P25 Phase 2.

OPERATION NOTES

Starting with SeeHawk Touch Release 5.1, the following tablets will no longer be supported: Samsung tab S2, S3, and S4. It is recommended to use Samsung tablets S6 and later.

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

IBWC file with multiple buildings:

Users should create separate Indoor Grid test for each building in the IBWC file and upload it to the corresponding building in SeeHawk Central.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Gflex USB connection to tablet:

Gflex scanner only works with Samsung S7 or later tablets when using a USB 3.0 cable for USB connection. Initial (first) connection with a tablet might not work. It is recommended to initiate a device connection again for Gflex scanner to connect to the tablet.
Gflex scanner works with Samsung S3, S4, S6, S7 and S8 tablets when using a USB 2.0 cable.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g. when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

Note: mmWave band 24.25 GHz – 44 GHz (band code 0x8800) is disabled. The band cannot be used for power measurement, or the scanner will not respond.

SUPPORTED OPERATING SYSTEMS

Android 10.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 5543 Application stops working if users change system font size.

SeeHawk Touch application may stop working if users change the tablet system’s font size while application is running.

Note that Indoor Grid data are saved in multiple text format files in an open folder. Any modification to the folder or the files may corrupt the data causing the test data to be unusable. Users are advised to refrain from modifying the folder or files.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 8111 Touch includes all BDA information in the report.

Touch includes all BDA information in the report regardless of user selection.

Defect 8121 Touch sometimes fails to include all selected channels in test plan.

Touch sometimes fails to include all selected channels in test plan downloaded from SeeHawk Central for Signal to Building Commissioning Test.

Defect 8199 Touch uses the incorrect channels for equipment room test plan.

Touch uses the incorrect channels for equipment room in test plan downloaded from SeeHawk Central when there are channels with the same number within the same protocol but from different custom channels bands.

Defect 8272 Pause and cancel data collect in Commissioning Test cause the next data collection to be in the pause mode.

Pause and cancel data collect in any Commissioning Test cause the next data collection to be in the pause mode.

2.0 Previous Release Notes

2.1 Release 5.1.0.0 (September 2024)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	5.1.0.0
SeeGull Connect	SeeGullConnect.apk	3.5.0.0

FEATURES

Supports IBflex and HBflex DMR DL Active Scan List scan.
Supports IBflex and HBflex TETRA DL Active Scan List scan.
Supports IBflex and HBflex Analog FM protocol and Analog FM Scan.
Supports Gflex Wi-Fi Top N scan.
Supports Gflex Wi-Fi Blind Scan.
Indoor Grid Features:
- Supports Analog FM Scan.
- Supports Signal Analyzer screenshot for Exterior Leakage Commissioning Test.
- Limit to one transmitter for Exterior Leakage and Isolation Commissioning Test.
- Supports user selectable value display on grid areas.
- Supports Radio ID in uplink data import.
- Supports the Fail Missing UL Tested Values flag. When this flag is turned on, test points that are expecting uplink values (UL Tested) but do not have imported data will be graded as a failure.
- Supports adding multiple BDA information.
- Updated BDA information content.
SeeHawk Central Features:
- Supports login to the Demo environment.
- Supports addresses outside of the United States and Building Type selection when creating buildings.
- Supports Test Type selection when uploading tests.
Supports last modified date, sorting and filtering capabilities in IBWC/IBX list.
Supports 1st, 2nd, 3rd and 4th peak find in Signal Analyzer.
Supports 1st, 2nd, 3rd and 4th Max Hold peak find in Signal Analyzer.
Supports Mapbox in outdoor mode. Separate license is required.

Restrictions for Uplink Testing:

Supports only one channel at a time for Uplink testing.
“Shared” channels are supported in P25 Phase 1.
Test radio ID can be decoded in P25 Phase 1.
Test radio dedicated channel is supported in P25 Phase 2.

OPERATION NOTES

Starting with SeeHawk Touch Release 5.1, the following tablets will no longer be supported: Samsung tab S2, S3, and S4. It is recommended to use Samsung tablets S6 and later.

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

IBWC file with multiple buildings:

Users should create separate Indoor Grid test for each building in the IBWC file and upload it to the corresponding building in SeeHawk Central.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Gflex USB connection to tablet:

Gflex scanner only works with Samsung S7 or later tablets when using a USB 3.0 cable for USB connection. Initial (first) connection with a tablet might not work. It is recommended to initiate a device connection again for Gflex scanner to connect to the tablet.
Gflex scanner works with Samsung S3, S4, S6, S7 and S8 tablets when using a USB 2.0 cable.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g. when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

Note: mmWave band 24.25 GHz – 44 GHz (band code 0x8800) is disabled. The band cannot be used for power measurement, or the scanner will not respond.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 5543 Application stops working if users change system font size.

SeeHawk Touch application may stop working if user changes the tablet system’s font size while application is running.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 7776 Indoor Grid transmitter data may not show properly.

After collecting data for transmitters imported from IBWC file in Indoor Grid and switching to another floor and then back to the original floor, the data may not show up properly. The data is being saved properly to file.

Defect 7851 SeeHawk Touch may corrupt an Indoor Grid test.

SeeHawk Touch may corrupt an Indoor Grid test file after failing to load a TAB file, making the test file unusable.

Defect 7890 Commission test image may not show up properly in report.

Commission test image may not show up properly in the report when it is generated in portrait mode.

Defect 7894 Indoor Grid transmitter may not show up properly in report.

Indoor Grid transmitter may not show up properly in the report after renaming.

Defect 7928 Indoor Grid transmitters from IBWC may not show up properly.

Indoor Grid transmitters imported from IBWC may show up in the wrong location if the floor plan is using a large image.

Defect 7976 Indoor map ruler registration accuracy.

Indoor map registration using ruler is not accurate when the line is not vertical or horizontal.

Defect 8007 LTE EB106 band has an incorrect frequency range.

LTE EB106 band has an incorrect frequency range. This affects scans that require frequency selection like Top N NB-IoT Signal Frequency.

Defect 8030 Incorrect result if using IBWC file with multiple buildings with same floor name.

If the users are using an IBWC file that contains multiple buildings with the same floor name, and when users import a floor with the same name but from a different building into an Indoor Grid test, the data will be corrupted and display incorrect results.

Defect 8051 Touch may not work properly if tablet is set to certain locale.

Touch may not work properly if the user’s tablet is set to a certain locale that uses comma instead of period for decimal point. Test can be created but cannot be playback or QuickView.

Defect 8056 Touch may stop working in Indoor Grid test.

Touch may stop working if users exit an Indoor Grid test, quick view the same test, and then create a new Indoor Grid test using the same floor from the previous test.

Defect 8081 Indoor Grid commission test does not work with antenna range settings.

The indoor Grid commission test does not work with antenna range settings and is always assigned to scanner’s RF port 1.

Defect 8091 Touch may fail to decode WCDMA MNC and MCC values.

Touch may fail to decode WCDMA MNC and MCC values in Top N Pilot scan and Blind Scan if the MNC value is less than 3 digits.

2.2 Release 5.0.0.0 (March 2024)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	5.0.0.0
SeeGull Connect	SeeGullConnect.apk	3.4.0.2

FEATURES

New Indoor Grid Features:

Supports Signal to Building Commissioning Test. Use to locate the best location for the donor antenna on the roof top.
Supports Isolation Commissioning Test. Use to test whether the indoor antenna is isolated from the donor antenna.
Supports Exterior Leakage Commissioning Test. Use to test whether the indoor antenna signals leak out and interfere with the outdoor signals around the perimeter of the building.
Supports BDA Filter Configuration Commissioning Test. Use to verify BDA passes all required channels at expected power levels and block other non-network frequencies.
Supports individual and complete commissioning test results.
Supports commissioning test in report generation.

IBflex and HBflex Features:

Supports IBflex and HBflex NR FR1 Top N Signal scan SIB2 to SIB9. Scanner option and firmware 3.10.0.0 or later are required.
Supports IBflex and HBflex NR FR1 Blind Scan SIB2 to SIB9. Scanner option and firmware 3.10.0.0 or later are required.
Supports IBflex and HBflex P25 DL Active Scan List scan.
Supports IBflex and HBflex P25 OOS-BER Active Scan List scan.
Supports IBflex and HBflex P25 UL Control Decode frequency offset. Scanner firmware 3.10.0.0 or later is required.
Supports IBflex and HBflex DMR DL Decode CSysCode and CSBKO values. Scanner option is required.

Gflex Features:

Supports Gflex LTE & NB-IoT Blind Scan with Mobile Blind Scan and layer 3 decoding. Scanner firmware 4.0.0.0 or later and scanner options are required.
Supports Gflex NB-IoT Blind Scan with Mobile Blind Scan and layer 3 decoding. Scanner firmware 4.0.0.0 or later and scanner options are required.
Supports Gflex NB-IoT Top N scan with layer 3 decoding.
Supports Gflex WCDMA Blind Scan with Mobile Blind Scan and layer 3 decoding. Scanner firmware 4.0.0.0 or later and scanner options are required.
Supports Gflex NR FR1 Top N Signal scan SIB2 to SIB9. Scanner option and firmware 5.0.0.0 or later are required.
Supports Gflex NR FR1 Top N Signal polarized antenna scan SIB2 to SIB9. Scanner option and firmware 5.0.0.0 or later are required.
Supports Gflex NR FR1 Blind Scan SIB2 to SIB9. Scanner option and firmware 5.0.0.0 or later are required.
Supports Gflex NR FR1 polarized antenna Blind Scan SIB2 to SIB9. Scanner option and firmware 5.0.0.0 or later are required.
Supports Gflex NR FR2 Top N Signal scan SIB1. Scanner option and firmware 5.0.0.0 or later are required.
Supports Gflex battery pack information display. Scanner firmware 5.1.0.0 or later is required.

General Features:

Supports additional SIB1 extracted values for NR Top N Signal and NR Blind Scan in table view.
Supports loading outdoor drive route in the KML format.
Supports additional map plot data modes for NR Blind Scan, LTE Blind Scan, Enhanced Top N Signal, P25 DL Decode, P25 RSSI, DMR Decode, DMR RSSI, TETRA Decode, and TETRA RSSI scans.
Supports additional Test Site data field for Uplink data import.
Supports NR 5G FR1 n104, and n105 DL/UL bands.
Supports NR 5G NTN FDD n255 DL/UL, and n256 DL/UL bands.
Supports FD-LTE EB 106 DL/UL band.

Restrictions for Uplink Testing:

Supports only one channel at a time for Uplink testing.
“Shared” channels are supported in P25 Phase 1.
Test radio ID can be decoded in P25 Phase 1.
Test radio dedicated channel is supported in P25 Phase 2.

OPERATION NOTES

Starting with SeeHawk Touch Release 5.1 (scheduled tentatively for mid-2024), the following tablets will no longer be supported: Samsung tab S2, S3, and S4. It is recommended to use Samsung tablets S6 and later.

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Gflex USB connection to tablet:

Gflex scanner only works with Samsung S7 or later tablets when using a USB 3.0 cable for USB connection. Initial (first) connection with a tablet might not work. It is recommended to initiate a device connection again for Gflex scanner to connect to the tablet.
Gflex scanner works with Samsung S3, S4, S6, S7 and S8 tablets when using a USB 2.0 cable.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g. when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

Note: mmWave band 24.25 GHz – 44 GHz (band code 0x8800) is disabled. The band cannot be used for power measurement, or the scanner will not respond.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 5543 Application stops working if user change system font size.

SeeHawk Touch application may stop working if user changes the tablet system font size while application is running.

Defect 7776 Indoor Grid transmitter data may not show properly.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 7173 Indoor Grid test shows incorrect uploaded date.

The Indoor Grid test shows incorrect uploaded date to Central. It was showing the last test date.

Defect 7188 Uploaded Indoor Grid test missing transmitter file.

The Indoor Grid test uploaded to Central was missing the transmitter file.

Defect 7245 Touch shows incorrect network name.

Touch shows incorrect network name based on detected MCC and MNC values.

Defect 7343 Touch fails to import UL data.

Touch fails to import UL data if the time zone of the source of the UL data (Remote Test Unit) is different from the time zone of the importing tablet.

Defect 7346 RF port selection for Uplink scan is not working properly.

The RF port selection for the Uplink scan is not working properly. The Uplink scan is always running on RF port 1.

Defect 7458 Wi-Fi Throughput scan setup not working properly.

The Wi-Fi Throughput scan setup does not allow users to enter the Server IP Address, Wireless Router SSID and Wireless Router Key.

Defect 7569 Touch fails to import UL data.

Touch fails to import UL data into P25 RSSI scan if the UL data comes from P25 UL decode scan.

Defect 7612 Touch fails to import UL data.

Touch may fail to import UL data into RSSI scan using custom channel.

Defect 7705 Touch may fail to save Indoor Grid data when using floor from IBWC.

Touch may fail to save Indoor Grid data when using floor from IBWC that contains invalid characters for file name.

Defect 7756 Touch fails to display Wi-Fi Blind Scan result in Blind Scan report.

Touch fails to display Wi-Fi Blind Scan result in the Blind Scan report UI.

Defect 7758 Touch may fail to save uplink data in Indoor Grid Equipment room.

Touch may fail to save user manual input uplink data in Indoor Grid Equipment room.

Defect 7761 Touch may stop responding after running uplink test in Indoor Grid.

Touch may stop responding after running uplink test in Indoor Grid when user choose to end the test close to the end of the automated timer.

2.3 Release 4.2.0.5 (May 2023)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	4.2.0.5
SeeGull Connect	SeeGullConnect.apk	3.3.0.1

FEATURES

Supports Gflex GSM Blind Scan with Mobile Blind Scan and Layer 3 decoding. Scanner firmware 3.0.0.0 or later and GSM scanner options are required.
Supports Gflex NR Blind Scan with Polarized Antenna, MIB decoding, and FR1 SIB1 decoding. Scanner firmware 3.0.0.0 or later and NR scanner options are required.
Supports Gflex NR Blind Scan iblock selection and Layer 3 reporting mode. Scanner firmware 3.1.1.0 or later is required.
Supports Gflex FD-LTE and TD-LTE Blind Scan iblock selection and Layer 3 reporting mode. Scanner firmware 3.0.0.0 or later is required.
Supports Gflex Top N NB-IoT Signal scan.
Supports Gflex USB connection with Android tablets. Refer to Operation Notes section for restrictions.
Supports IBflex and HBflex TD-LTE and TD-LTE Blind Scan iblock selection and Layer 3 reporting mode. Scanner firmware 3.9.2.0 or later is required.
New Uplink events import features:
- Supports UL events import into Outdoor and Indoor test.
- Supports import for P25 DL Decode, P25 RSSI, DMR Decode, DMR RSSI, TETRA Decode, TETRA RSSI, and Custom Channel Power RSSI scans.
- Supports UL events files from Touch Uplink Test and SeeHawk Monitor Uplink Test.
- Supports multiple files import from different test sites.
- Supports data display in QuickView, map plot, and table view.
Supports PCI Selection for NR Top N Signal, and FD-LTE and TD-LTE Enhanced Top N Signal scans.
Supports setting up Layer 3 in Blind Scan Channel selection wizard.

Restrictions for Uplink Testing:

Supports only one channel at a time for Uplink testing
“Shared” channels are supported in P25 Phase 1
Test radio ID can be decoded in P25 Phase 1
Test radio dedicated channel is supported in P25 Phase 2

OPERATION NOTES

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Gflex USB connection to tablet:

Gflex scanner only works with Samsung S7 or later tablets when using a USB 3.0 cable for USB connection. Initial (first) connection with a tablet might not work. It is recommended to initiate a device connection again for Gflex scanner to connect to the tablet.
Gflex scanner works with Samsung S3, S4, S6, S7 and S8 tablets when using a USB 2.0 cable.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g. when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

Note: SeeHawk Touch 2.1.1 or earlier must have a license upgrade to use SeeHawk Touch 2.1.3 and above. Please contact PCTEL Technical Support for additional information about upgrading license keys.

Note: mmWave band 24.25 GHz – 44 GHz (band code 0x8800) is disabled. The band cannot be used for power measurement, or the scanner will not respond.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 5543 Application stops working if user change system font size.

SeeHawk Touch application may stop working if user changes the tablet system font size while application is running.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 7018 Blind Scan Report fails to display LTE network name.

Blind Scan Report fails to display LTE network name when SIB1 is detected.

Defect 7021 Display Markers setting may not work properly.

Display Markers setting in application settings may not work properly to turn on and off markers display in map.

Defect 7067 Equipment Room data may not refresh properly after importing UL data.

After importing UL data into Equipment Room, the latest data is not refreshed in the UI.

Defect 7068 Fail to import UL data to other floors except the current floor.

When importing UL data into Indoor Grid test, it only applies to the current floor but not other floors in the test.

Defect 7082 Fail to load image for Antenna Verification Test.

SeeHawk Touch may get into a state where loading an image for Antenna Verification Test will always fail.

Defect 7111 Fail to apply thresholds from SeeHawk Central.

SeeHawk Touch fails to apply thresholds setting downloaded from SeeHawk Central.

2.4 Release 4.1.0.1 (September 2022)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	4.1.0.1
SeeGull Connect	SeeGullConnect.apk	3.2.0.1

FEATURES

Supports Gflex GSM Color Code scan with Layer 3 decoding.
Supports Gflex LTE Enhanced Top N Signal Layer 3 decoding.
Supports Gflex LTE Blind Scan with Layer 3 decoding, Mobile Blind Scan and 5G / 4G Spectrum Sharing mode.
Supports Gflex nr Top N Signal MIB and SIB1 decoding and Polarized Antenna mode.
Supports Gflex nr Blind Scan MIB decoding. Scanner firmware 1.5.0.0 or later, and nr MIB scanner options are required.
Supports Gflex nr Blind Scan Cell Defining SSB measurement mode. Scanner firmware 1.5.0.0 or later is required.
Supports IBflex and HBflex nr Blind Scan Polarized Antenna and Cell Defining SSB measurement mode. Scanner firmware 3.8.6.0 or later, and Polarized Antenna scanner options are required.
Supports IBflex and HBflex nr Blind Scan SIB1 decoding. Scanner firmware 3.9.0.0 or later, and Nr SIB1 scanner options are required.
Supports IBflex and HBflex P25 UL Control Channel Decode scan.
Supports antenna gain and cable loss in Blind Scan.
Supports P25 UL Control Channel in Uplink Test Mode.
New Indoor Grid features:
- Supports entering BDA information and option to use in report generation.
- Supports custom user logo for report generation.
- Supports automated UL power calculation for RSSI measurement.
- Supports option to exclude UL columns in report generation.
Supports optional custom name for each non-uniform custom channels.
Supports frequencies display and duplicate frequencies highlighting in Blind Scan wizard for LTE, WCDMA, CDMA, and EVDO Blind Scan.
Supports last modified date, sorting and filtering capabilities in Test list, Indoor Map list and Equipment Rooms list.
Supports Ranplan features:
- Supports IBX file format import from Ranplan Professional.
- Supports in Indoor, Indoor Grid, AVT mode.
- Supports IBX transmitters display.
- Supports saving survey data in the IBX file format for import into the Ranplan application.
Supports export of nr Top N, P25 Decode, DMR Decode, and TETRA Decode data to iBwave. Supports export of all LTE PCI to iBwave.
Supports NR 5G FR1 n77 Lower proprietary, n77 Upper proprietary, n101, and n102 bands.
Supports FD-LTE EB 103 DL/UL band.
Supports Public Safety 10 – 1000 MHz wide band for P25.

Restrictions for Uplink Testing:

Supports only one channel at a time for Uplink testing
“Shared” channels are supported in P25 Phase 1
Test radio ID can be decoded in P25 Phase 1
Test radio dedicated channel is supported in P25 Phase 2

OPERATION NOTES

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

Note: mmWave band 24.25 GHz – 44 GHz (band code 0x8800) is disabled. The band cannot be used for power measurement, or the scanner will not respond.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 5543 Application stop working if user change system font size.

SeeHawk Touch application may stop working if user change the tablet system font size while application is running.

Note that Indoor Grid data are saved in multiple text format files in an open folder. Any modification to the folder or the files may corrupt the data causing the test data unusable. Users are advised to refrain from modifying the folder or files.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 6514 Indoor Grid building result may be incorrect when using multiple channel groups.

Indoor Grid building result may be incorrect when using multiple channel groups that being created through the measurement setup page.

Defect 6619 Indoor Grid “First” sample collection method not working properly.

Indoor Grid “First” sample collection method not working properly. When selected, default sample collection mode “Average” or “Max” is used.

Defect 6627 SeeHawk Touch may stop responding when a Noise Channel is selected in Indoor Grid for map display.

SeeHawk Touch may stop responding when a Noise Channel is selected in Indoor Grid for map display.

2.5 Release 4.0.0.1 (May 2022)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	4.0.0.1
SeeGull Connect	SeeGullConnect.apk	3.1.0.0

FEATURES

Supports Gflex scanning receiver through Bluetooth connection.
Supports Uplink Test Mode:
- Supports uplink scans setup and scheduling for P25 and Channelized Power.
- Supports automatic uplink events recreation.
Indoor Grid features:
- Supports uplink test time stamp collection.
- Supports uplink data import.
- Supports uplink data for Reference Points.
- Supports uplink data for Equipment Room test points.
- Supports separate downlink and uplink grading selections.
Supports IBflex and HBflex nr Blind Scan MIB decoding. Scanner firmware 3.8.7.0 or later, and nr MIB scanner options are required.
Supports NR 5G FR1 n13DL/UL, n24DL/UL, n26DL/UL, n46, n47, n67DL, n85DL/UL, n96, n97, n98 and n99 bands.
Supports NR 5G FR2 n259 and n262 bands.
Supports Android 12 OS.

Restrictions for Uplink Testing:

Supports only one channel at a time for Uplink testing
Measure only P25 traffic channels
“Shared” channels are supported in P25 Phase 1
Test radio ID can be decoded in P25 Phase 1
Test radio dedicated channel is supported in P25 Phase 2

OPERATION NOTES

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

Note: mmWave band 24.25 GHz – 44 GHz (band code 0x8800) is disabled. The band cannot be used for power measurement, or the scanner will not respond.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 5543 Application stop working if user change system font size.

SeeHawk Touch application may stop working if user change the tablet system font size while application is running.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 6485 Touch fails to read data file greater than 2GB.

Touch fails to read data file greater than 2GB. Outdoor and Indoor test playback and export stops after reaching the 2GB limit.

Defect 6495 Touch not displaying all PCIs for nr Blind Scan.

Touch not displaying all PCIs detected when using IBflex and HBflex nr Blind Scan.

2.6 Release 3.4.1.0 (November 2021)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	3.4.1.0
SeeGull Connect	SeeGullConnect.apk	3.0.0.0

FEATURES

No new features. Refer to Problems Resolved in this Release.

OPERATION NOTES

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 5543 Application stop working if user change system font size.

SeeHawk Touch application may stop working if user change the tablet system font size while application is running.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 6300 SeeHawk Touch App may stop working after initial installation if storage permission is not granted.

After installation, SeeHawk Touch App may stop working because storage permission was not granted.

2.7 Release 3.4.0.2 (October 2021)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	3.4.0.2
SeeGull Connect	SeeGullConnect.apk	3.0.0.0

FEATURES

Supports cloud-based licensing.
- License can be acquired for a 24-hour period and automatically expired and returned after that period.
- Requires customer to have cloud-based license.
Supports multiple NR Blind Scans for each band in different sub carrier spacing.
Supports adding SA screenshots for channel grouping into generated report in Indoor Grid test.

OPERATION NOTES

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 5543 Application stop working if user change system font size.

SeeHawk Touch application may stop working if user change the tablet system font size while application is running.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 6231 SeeHawk Touch failed to show grids in indoor map offline editing.

SeeHawk Touch failed to show grids in indoor map offline editing.

Defect 6247 Indoor Grid Test building result may get affected by noise channel.

Indoor Grid Test building result may get affected by selected noise channel when calculation method is set to By Total Areas.

Defect 6251 SeeHawk Touch failed to load channel grouping from workspace.

SeeHawk Touch failed to load channel grouping information from workspace file.

2.8 Release 3.3.0.0 (August 2021)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	3.3.0.0
SeeGull Connect	SeeGullConnect.apk	3.0.0.0

FEATURES

Supports SeeHawk Central integration:
- Supports Indoor Grid Test upload.
- Supports Indoor Grid Test Plan download.
- Supports Indoor Map upload and download.
- Supports Workspace upload and download.
- Supports Thresholds upload and download.
- Require subscription and login credential to SeeHawk Central. User permission may restrict user functions in SeeHawk Touch.
Supports Indoor Grid transmitters testing:
- Supports max values data collection.
- Supports in report generation.
Supports SIB24 and SIB25 for LTE Blind Scan.

OPERATION NOTES

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 5543 Application stop working if user change system font size.

SeeHawk Touch application may stop working if user change the tablet system font size while application is running.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 5817 SeeHawk Touch may display error in Indoor Grid and Antenna Verification mode when SD card recording is selected.

SeeHawk Touch may display error in Indoor Grid and Antenna Verification mode when SD card recording is selected even though SD card recording is not applicable in those modes.

Defect 5883 Indoor Grid Test may get corrupted when floor plan name contains comma.

Indoor Grid Test may get corrupted when floor plan name contains comma.

Defect 5884 SeeHawk Touch may stop responding when resume Indoor Grid Test.

SeeHawk Touch may stop responding when resuming an Indoor Grid Test that is default to an equipment room.

Defect 6112 Discrepancy in grid size between table and report.

Minor discrepancy in grid size between Indoor Grid table and generated report when registration area is large.

Defect 6184 Incorrect Signal Analyzer screenshot ID in report.

Signal Analyzer screenshot ID for Indoor Grid area point in report is incorrect.

2.9 Release 3.2.0.2 (March 2021)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	3.2.0.2
SeeGull Connect	SeeGullConnect.apk	2.11.0.0

FEATURES

No new features. Refer to Problems Resolved in this Release.

OPERATION NOTES

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 4047 Application performance degrades when running Spectrum Analysis scan with sweep number lower than 16.

By default, Spectrum Analysis scan has sweep number set to 16. If the users change the sweep number to a lower number, the performance of the application response time may degrade.

Defect 4475 In settings with a large amount of Bluetooth activity, the Bluetooth connection to the scanner may experience some difficulty in the detection process.

SeeHawk Touch may not always detect the scanner through Bluetooth in an environment that has lots of Bluetooth devices, and repeated attempts may be required.

Defect 5191 Test file fail to export in Auto Export.

When user rename a SeeHawk drive test in SeeHawk Touch using Samsung Tab A tablet, the drive fails to properly export in SeeHawk Auto Export tool.

Defect 5543 Application stop working if user change system font size.

SeeHawk Touch application may stop working if user change the tablet system font size while application is running.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 5855 SeeHawk Touch fail to support mmWave custom channel.

SeeHawk Touch fail to support mmWave frequency when setting up uniform and non-uniform custom channel.

Defect 5874 Indoor Map ruler registration accuracy.

Indoor Map manual ruler registration may not be accurate when the image size is large (above 8000 x 8000 pixels).

2.10 Release 3.2.0.0 (February 2021)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	3.2.0.0
SeeGull Connect	SeeGullConnect.apk	2.11.0.0

FEATURES

Supports IBflex and HBflex P25 UL Decode Phase I scan in Drive Test and Walk Test.
Supports IBflex and HBflex polarized antenna mode in nr Top N Signal.
Supports IBflex and HBflex 5G / 4G Spectrum Sharing mode in LTE Blind Scan.
Supports LTE-M data in LTE Blind Scan table.
Supports test data sharing, in the following modes: Drive Test, Walk Test, Antenna Verification Test, and Indoor Grid Test.

OPERATION NOTES

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 4047 Application performance degrades when running Spectrum Analysis scan with sweep number lower than 16.

By default, Spectrum Analysis scan has sweep number set to 16. If the users change the sweep number to a lower number, the performance of the application response time may degrade.

Defect 4475 In settings with a large amount of Bluetooth activity, the Bluetooth connection to the scanner may experience some difficulty in the detection process.

SeeHawk Touch may not always detect the scanner through Bluetooth in an environment that has lots of Bluetooth devices, and repeated attempts may be required.

Defect 5191 Test file fail to export in Auto Export.

When user rename a SeeHawk drive test in SeeHawk Touch using Samsung Tab A tablet, the drive fails to properly export in SeeHawk Auto Export tool.

Defect 5543 Application stop working if user change system font size.

SeeHawk Touch application may stop working if user change the tablet system font size while application is running.

PROBLEMS RESOLVED IN THIS RELEASE

None

2.11 Release 3.1.0.0 (December 2020)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	3.1.0.0
SeeGull Connect	SeeGullConnect.apk	2.10.0.2

FEATURES

Supports SeeGull HBflex 1 RF port selection for 40ms SSB periodicity in nr Top N Signal scan for FR2 bands.
Supports SeeGull IBflex and HBflex nr Top N Signal scan SIB1 decoding.
Supports SeeGull MXflex 5G / 4G Spectrum Sharing mode in Enhanced Top N Signal scan.
Indoor Grid mode features:
- Supports Equipment Room features. In an Equipment Room, user add test points instead of grid to collect data. Collected data is not used in the result calculation.
- Supports noise channel features in grid floor. Channel selected as noise channel contains only power value and not used in the result calculation.
- Supports launching Signal Analyzer and include Signal Analyzer screenshots into report.
- Supports Wi-Fi Top N scans.
- Updated reports.
Supports offline creation and editing of Equipment Room map.
Supports Enhanced Top N Signal scan SIB24 and SIB25 decoding.
Supports MCC, MNC, and network name in nr Top N Signal table.
Supports LTE-M data in Enhanced Top N Signal table.
Supports additional map data modes for Top N Wi-Fi scans.
Supports NR 5G FR1 TDD n53 and FR1 SUL n89 bands.
Supports FD-LTE EB 87 DL/UL and EB 88 DL/UL bands.
Supports TD-LTE EB 53 band.

OPERATION NOTES

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 4047 Application performance degrades when running Spectrum Analysis scan with sweep number lower than 16.

By default, Spectrum Analysis scan has sweep number set to 16. If the users change the sweep number to a lower number, the performance of the application response time may degrade.

Defect 4475 In settings with a large amount of Bluetooth activity, the Bluetooth connection to the scanner may experience some difficulty in the detection process.

SeeHawk Touch may not always detect the scanner through Bluetooth in an environment that has lots of Bluetooth devices, and repeated attempts may be required.

Defect 5191 Test file fail to export in Auto Export.

When user rename a SeeHawk drive test in SeeHawk Touch using Samsung Tab A tablet, the drive fails to properly export in SeeHawk Auto Export tool.

Defect 5543 Application stop working if user change system font size.

SeeHawk Touch application may stop working if user change the tablet system font size while application is running.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 5706 Wi-Fi Top N bar chart may not display all detected SSID.

Wi-Fi Top N bar chart may not display all detected SSID values.

Defect 5719 SeeHawk Touch may stop responding when setup CDMA Top N Pilot.

SeeHawk Touch may stop responding when user try to setup CDMA Top N Pilot scan for MXflex.

Defect 5745 SeeHawk Touch may stop responding when using IBWC in AVT mode.

SeeHawk Touch may stop responding when using multiple IBWC floors in AVT mode.

Defect 5747 Missing transmitters on map.

Transmitters on map in AVT and Indoor Grid modes may disappear after switching between floors.

Defect 5749 Grid editing for IBWC floor not working properly.

Grid editing for IBWC floor prevent user from deleting all grids.

Defect 5757 Signal Analysis may not work properly for RF port 4.

Signal Analysis may not work properly when using RF port 4 with connection to a MXflex scanner.

Defect 5758 Signal Analysis apply incorrect attenuation and external offset.

Signal Analysis apply incorrect attenuation and external offset values for RF port 3 and RF port 4.

Defect 5762 Indoor Grid area data may not be deleted after set to ignore.

Indoor Grid area data that has been captured but later set to ignore may not been deleted completely.

Defect 5763 Transmitters are not included in Indoor Grid report.

Transmitters are not included in Indoor Grid report map images.

Defect 5769 Collected indoor test file cannot run quick view.

SeeHawk Touch may allow use of external TAB file that contains invalid coordinates during data collect but result cannot run quick view.

Defect 5772 Fail to save Power Analysis data when no signal is detected.

SeeHawk Touch fail to save Power Analysis header information when no signal is detected.

Defect 5773 Collected indoor test file cannot playback or export in SeeHawk Collect.

SeeHawk Touch may allow user to enter invalid coordinates during image registration causing collected data cannot be playback or export in SeeHawk Collect.

Defect 5774 SeeHawk Touch may stop responding when try to quick view a test file with invalid TAB file.

SeeHawk Touch may stop responding when try to quick view a test file with invalid TAB file.

2.12 Release 3.0.0.2 (May 2020)

COMPONENT VERSION INFORMATION

Component Name	File Name	Version
SeeHawk Touch	SeeHawkTouch.apk	3.0.0.2
SeeGull Connect	SeeGullConnect.apk	2.9.0.0

FEATURES

Supports SeeGull IBflex and HBflex TETRA Decode scan with Color Code, MCC and MNC.
Supports SeeGull IBflex and HBflex SSB repetition period flag and single RF port scan in nr Top N Signal scan.
Indoor Grid mode features:
- Supports TETRA Decode scans.
- Supports grid rotation.
- Supports launching Signal Analyzer for DMR and TETRA channels.
- Supports transmitter editing.
- Updated reports.
- Changed default grading for LTE to Signal Power (RSRP). Signal Power will be displayed in grid area.
- Changed default grading for WCDMA to Signal Power (Ec). Signal Power will be displayed in grid area.
Antenna Verification mode features:
- Supports TETRA Decode scans.
- Supports DMR Decode scans.
- Supports nr Top N scans.
Signal Analyzer features:
- Supports TETRA Channel Mode with Decode scan.
- Supports DMR Channel Mode with Decode scan.
Supports measurement setup filtering based on scan mode (Indoor, Outdoor, Antenna Verification or Indoor Grid). Only measurements applicable to the selected mode will be displayed and configurable.
Supports band search in measurement setup.
Supports scan averaging for uniform and non-uniform custom channel RSSI scans for Custom Channel Power, P25, DMR and TETRA.
Supports importing channels and frequencies information from external text file into non-uniform custom channel. Predefined headers required.
Supports launching Signal Analyzer from Indoor and Outdoor mode scan table.
Supports Spectrum Power mode in bar chart for nr Blind Scan.
Supports SeeHawk Touch App auto update based on maintenance license.
Supports NR 5G FR1 FDD n91 DL, FR1 FDD n91 UL, FR1 FDD n92 DL, FR1 FDD n92 UL, FR1 FDD n93 DL, FR1 FDD n93 UL, FR1 FDD n94 DL, FR1 FDD n94 UL and FR1 SUL n95 bands.
Supports Android 10 OS.

OPERATION NOTES

Data upload to a server using FTPS connection may not work. Customers are advised to use FTP or SFTP connections to upload data.

Guidance on the use of the P25 technology, P25 Custom Channels and Custom Channel Power features:

Only frequencies (channels) known to be P25 should be configured for the P25 Decode scan; other technologies will fail to be decoded and poor SINR values will be reported.
Other technologies should use the Custom Channel Power feature.

Guidance on the use of setting the Antenna Frequency:

Antenna Frequency range should be set correctly when using SeeHawk Touch. At least one RF port should cover the entire range of the band where the intended channel/frequency scan measurement is to be done. (e.g when setting up P25 decode scans on RF1, select the entire range. Set RF1 from 10MHz to 990MHz). The frequency ranges should not overlap for RF1 and RF2. The same is applicable for other technologies.

SUPPORTED OPERATING SYSTEMS

Android 6.0 and above

PHYSICAL SPECIFICATIONS

Bluetooth 4.0 and above
USB 2.0

KNOWN PROBLEMS AND LIMITATIONS IN THIS RELEASE

Defect 4047 Application performance degrades when running Spectrum Analysis scan with sweep number lower than 16.

By default, Spectrum Analysis scan has sweep number set to 16. If the users change the sweep number to a lower number, the performance of the application response time may degrade.

Defect 4475 In settings with a large amount of Bluetooth activity, the Bluetooth connection to the scanner may experience some difficulty in the detection process.

SeeHawk Touch may not always detect the scanner through Bluetooth in an environment that has lots of Bluetooth devices, and repeated attempts may be required.

Defect 5191 Test file fail to export in Auto Export.

When user rename a SeeHawk drive test in SeeHawk Touch using Samsung Tab A tablet, the drive fails to properly export in SeeHawk Auto Export tool.

Defect 5543 Application stop working if user change system font size.

SeeHawk Touch application may stop working if user change the tablet system font size while application is running.

PROBLEMS RESOLVED IN THIS RELEASE

Defect 5389 When using the Screen Capture button, check marks displayed in the image, will not show up.

The workaround is to use the tablet’s screen grab buttons; for example, Power-Home buttons.

Defect 5393 Unable to edit iBwave floor plans.

Unable to edit iBwave floor plans without starting a scan.

Defect 5409 Display error when try to move a critical point.

SeeHawk Touch may display a saving error when try to move a critical point in Indoor Grid collection.

Defect 5410 Critical and reference point accidentally moved.

Critical point and reference point in Indoor Grid may accidentally get moved slightly when they are being selected.

Defect 5413 Critical point signal power value missing in report.

Critical point signal power value is missing from the Indoor Grid report.

Defect 5510 Fail to launch Signal Analyzer for mmWave bands.

Fail to launch Signal Analyzer for mmWave band from Indoor Grid.

Defect 5514 Fail to display map data for nr Blind Scan.

Fail to display Best Serving Cell ID / Beam Index map data for nr Blind Scan.

Defect 5539 Incorrect export data to iBwave.

SeeHawk Touch may export data with incorrect coordinates to iBwave.

Defect 5541 Software license not working in Android 10 OS.

SeeHawk Touch software license not working under Android 10 OS causing application not usable.

Defect 5556 Incorrect Indoor Grid building result.

SeeHawk Touch may display incorrect Indoor Grid building result if users change the Apply Adjacent Area Rule settings while in the building result. Workaround is to move to the floor result and back to building result to cause a refresh.

Top Links