If an IBFLEX scanner displays a ParameterOutOfRange error during blind scan setup, verify the scan frequency range, step size, bandwidth, and band configuration.
Check that the selected start and stop frequencies are valid for the scanner model and selected band. Confirm that the scan parameters do not exceed supported operating limits.
Recommended troubleshooting:
1. Confirm the IBFLEX model and serial number.
2. Verify the software version.
3. Review the selected frequency range.
4. Confirm the antenna and RF input setup.
5. Restart the software and reload the scan configuration.
6. If the issue continues, collect screenshots and escalate to technical support.
Before escalation, collect:
- Product model
- Serial number
- Software version
- Error message
- Screenshot of scan setup
- Frequency range being configured